Comprehensive Kitchen Plumbing in Deerfield, IL
Whether you’re just swapping a faucet or doing a full kitchen renovation with sink relocation, gas line installation, or adding a pot filler, our team is ready. The job’s complexity sets the schedule, cost, and whether permits are needed. We take care of all plumbing details so your remodel stays on track.
Here’s my tip for your project: get your plumber involved before the cabinets arrive. Moving a sink means rerouting drains and vents, best done with the subfloor exposed. Gas line rough-ins for new ranges or islands have to happen before cabinetry goes in. Pot filler installs require opening the wall behind the stove, so that’s easier before tile or backsplash. Early plumber scheduling avoids costly delays.
We also handle standalone kitchen plumbing needs: faucet repairs or upgrades, disposal servicing, dishwasher hookups, or refrigerator water line installs without a full remodel. Remodeling is a good time to see if your water heater can meet extra demand or to clear slow drains before closing up walls. Just call 224-300-7452 for anything kitchen plumbing related.
Services We Offer for Kitchen Plumbing
Kitchen Sink & Faucet Installation
We fit all types of kitchen sinks — undermount, drop-in, apron-front, single or double bowl, and prep sinks. Installation covers drain assembly, P-trap setup, and braided stainless steel supply connections, avoiding the brittle plastic lines you don’t want. We also connect garbage disposals during the same visit when needed.
For faucets, we handle any style and mounting setups — 1-hole, 3-hole with deck plate, and pressure test everything thoroughly. Moving a sink involves drain rerouting, vent tweaks, and supply line extensions, which we perform with proper permits and inspections.
Dishwasher & Appliance Hookups
Installing a dishwasher includes hooking up the hot water supply, running the drain line with a correct high loop or air gap to prevent contamination, and ensuring power is compatible (we coordinate with your electrician). For fridges with ice makers or water dispensers, we run a dedicated cold water line with a shutoff valve right behind the unit.
We also install instant hot water taps, under-sink filtration, and reverse osmosis units, including faucet fitting and waste connections. Reach out at 224-300-7452 for any appliance hookups in your kitchen.
Gas Line Installation for Kitchen Appliances
Planning to switch to gas or add a cooktop in your island? We size and install gas piping to match your appliance’s BTU needs, carefully routing from your existing supply, installing shutoff valves, and connecting the appliance with flexible gas connectors approved by code. We pressure test the line and handle all required permits and inspections.
Note: Gas line rough-ins must happen before cabinets get installed to avoid disruptive work later. Coordinate early with your contractor and our team to stay on schedule.
Pot Filler Faucet Installation
A pot filler faucet mounted near your stove adds convenience by letting you fill pots right at the cooktop. It needs a cold water line run inside the wall roughly 56 to 60 inches off the floor and near the range centerline. Installing one is easiest during a remodel with open walls but can be done in finished kitchens with some wall patching. Call us at 224-300-7452 to plan yours.
Island Sink Plumbing & Venting
Island sinks require special venting solutions since there’s no adjacent wall for a standard vent stack. We install island loop vents or air admittance valves as allowed by local codes. Hot and cold water supply runs under the floor to the island, and drain lines are routed carefully through the subfloor back to the home’s main waste system. We’ve done plenty of island sinks in Deerfield homes – call to discuss your design.
Checklist for Kitchen Plumbing Work
- Removing and installing sinks of all styles
- Faucet replacement or new installation
- Garbage disposal install or replacement
- Dishwasher water and drain hook-up
- Running water lines for refrigerator ice makers
- Gas piping for range, oven, or cooktop
- Pot filler faucet rough-in and installation
- Under-sink water filtration and RO systems
- Vent and drain routing for island sinks
- Upgrading shutoff valves throughout the kitchen
- Installing prep or bar sinks in pantry or island
Timing Tips for Kitchen Plumbing
- Confirm sink location early: Moving the sink is a major job—lock down placement before cabinet orders.
- Gas line rough-in before cabinetry: Running gas lines must be done while walls are open to avoid costly rerouting.
- Pot filler install before backsplash: Wall access is easier before tile installation.
- Replace old shutoffs early: Swap out gate valves for ball valves while plumbing is exposed.
- Fridge water line before counters: It’s easier to run supply lines before countertops are set.
Common Questions About Kitchen Remodeling Plumbing
Yes. Relocating a sink to the island is a big plumbing change because it requires special venting like an island loop vent or an air admittance valve. Running supply lines is straightforward, but the drain has to be routed carefully through the floor. We’ve done this many times – call us to talk about your island setup before finalizing plans.
If you’re just swapping out fixtures in the same spot (a faucet or disposal), usually no permit is needed. But anytime you reroute drains, add supply lines, or install gas lines, permits and inspections are required. We take care of all the paperwork for you as part of the job.
Absolutely. Gas line installation is safest and easiest during a remodel when walls are open. We handle sizing, install, pressure tests, and pull permits. Make sure to schedule the gas rough-in before the cabinets are installed to avoid rework.
Yes, we often work alongside GCs and designers. We sync our plumbing rough-in and finish work with your contractor’s schedule and manage permits. Call early so we can fit into your remodel timeline without delays.